Percussion Caps #11 In Stock Overview

CCI Primers( Percussion Caps #11 In Stock ) continuously tested and improved. As a result today’s CCI primers are more sensitive, easier to seat and more compatible with progressive and automated loading equipment than ever before.

They utilize modern non-corrosive and non-mercuric initiator mixes for the cleanest burn possible.

FAQ On Percussion Caps #11 In Stock

• What were percussion caps used for?

The caplock mechanism consists of a hammer and a nipple, sometimes referred to as a cone. The nipple contains a tube which goes into the rearmost part of the gun barrel. The percussion cap placed over the hollow metal nipple.

• What size percussion caps do I need?

Ideally, a proper fitting cap will contact the top of the cap, and fit snugly in place, so the diameter of the nipple should be the exact size of the ID of the cap, or a few thousandths of an inch smaller, so the cap can be pushed firmly into place. The main consideration is the internal height of the nipple.

• When did percussion caps become obsolete?

By the turn of the 20th century, though, percussion caps had fallen out of favor with the introduction of the self-contained metal cartridge and breach loading firearms (Pope 1965; Scott 2020). The purpose of the cap was to offer a reliable form of ignition when firing a muzzle loading firearm.

• Why is percussion cap better than flintlock?

The advantages of percussion over flintlock are profound. Percussion lock guns are less complicated, faster to load, have a quicker lock time, and are more reliable. This gives percussion significant advantages over flintlock in pretty much all shooting disciplines.

• Does CCI still make percussion caps?

CCI® Percussion Caps provide the reliable, consistent ignition blackpowder shooters need. They feature non-corrosive, non-mercuric priming compounds with soft, ribbed copper cups, and they are available in a variety of styles.

• Is Remington making percussion caps?

Product Overview. Black-powder enthusiasts demand positive ignition, and rightly so. Remington percussion caps deliver like no others. They’re available in 100-count tins, and economical 5,000-count cases.

More On FAQ

• Are percussion caps the same as primers?

Primers and percussion caps perform the same function, but are structurally different. A percussion cap is a copper or brass cup holding a pressure sensitive explosive that goes over the nipple or firing cone in a percussion firearm. There are two basic types of primers: Berdan and Boxer.

• What chemical is in a percussion cap?

mercuric fulminate

The percussion cap was made possible by the discovery of a chemical compound called mercuric fulminate or fulminate of mercury. Its chemical formula is Hg(ONC)2 — it is made from mercury, nitric acid and alcohol. Mercuric fulminate is extremely explosive, and it is also shock sensitive.

• Can you use a 209A primer in a muzzleloader?

209A Shotshell Primers are non-corrosive, all-weather, shotshell primers that deliver a fast, dependable ignition under any shooting situation. These primers deliver higher velocities plus increased accuracy. The 209 primers are perfect for trap shooting or use with your favorite muzzleloader.

• What are CCI #11 percussion caps?

CCI® Primers #11 percussion caps are fabricated from a non-corrosive, non-mercuric compound mix and also assembled in individual, ribbed, copper caps for standard revolvers, rifles and muzzleloaders. These ribbed caps match standard #11 nipple sizes and provide both clean burning and extremely reliable ignition.

• What are #11 percussion caps used for?

It’s simply a small metallic cup with a tiny amount of percussive explosive in it that’s used to ignite the charge in a cap-lock or percussion fired muzzleloader or revolver. To be practical, caps need to be tight-fitting, reliably firing, and also pack enough punch to consistently ignite your powder charge.

More

• What is the difference between #11 and #10 percussion caps?

There are more differences in application than you might think. For instance, #10 percussion caps are mostly used in black powder pistols where as #11 and musket percussion caps are mostly used for muzzleloading rifles.

• When did percussion caps become obsolete?

By the turn of the 20th century, though, percussion caps had fallen out of favor with the introduction of the self-contained metal cartridge and breach loading firearms (Pope 1965; Scott 2020). The purpose of the cap was to offer a reliable form of ignition when firing a muzzle loading firearm.

• What size percussion caps does a Ruger Old Army use?

The suggested cap size for the Old Army revolver is No. 10 or No. 11 (U.S.) or equivalent. Since percussion caps have an open end (which is placed on the cylinder nipple when you are ready to fire), they are susceptible to contamination. ( standard nipple dimensions, magnum percussion cap, assembled in ribbed copper cups, caps in stock, traditional 100-count tins ).