Lapua World-class brass(6.5 PRC Lapua Brass In Stock ) begins with high-quality raw materials and also superior smelting and metallurgical competence. Throughout the production process, the focus on quality control is consistent with Lapua’s exacting standards. Particular attention   paid to hardness, solidity and grain structure. All Lapua brass    tested to 30% overpressure according to Commission Internationale Permanente. The agency that oversees ammunition and also component producers in Western Europe. This   not loaded ammunition.

More On 6.5 PRC Lapua Brass

Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.  These imperfections occur in the final tumbling wash operation after the case mouth has     annealed.  Brass manufacturers   aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.  Minor dents    normally removed in the first firing and will not affect case life or performance.  On non-plated brass, you may also notice all the anneal stain might not be polished off. Which may give the case neck a pinkish color.  With some smaller caliber cases you may notice the case mouths to be slightly belle.

With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and also debur the case mouth inside and out.  To straighten the case mouth, run the case part way into the sizer die and also let the expander ball straighten the brass.  To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.